H-4000

 

  • Number of Spindles 4,5 and 8 standard
  • Programmable stroke of Head 25"
  • Rapid Traverse of Head 350 IPM
  • Programmable Feed Rates .50-225 IPM
  • Working Thrust of Head Slide 1,000 lbs.
  • Main Spindle Drive 5 H.P. variable frequency drive
  • Secondary Spindle Drive 3 H.P. variable frequency drive
  • Spindle Speed Range 200-1800 RPM
  • Indexing Table 8 station electromechanical drive
  • Index Time .75 seconds (45° increments)
  • Dial Plate 31" dia. cast iron surface ground plate
  • Coolant System 35 gallon tank with 10 GPM flow rate
  • Electrical 460 V, 3 phase
  • Optional Coolant Filtration Roll media or magnetic filtration
  • unit down to 5 microns

 

H-5000

 

  • Number of Spindles 4,5 and 8 standard
  • Programmable stroke of Head 25"
  • Rapid Traverse of Head 350 IPM
  • Programmable Feed Rates .50-225 IPM
  • Working Thrust of Head Slide 1,000 lbs.
  • Main Spindle Drive 5 H.P. variable frequency drive
  • Secondary Spindle Drive 3 H.P. variable frequency drive
  • Spindle Speed Range 200-1800 RPM
  • Indexing Table 8 station electromechanical drive
  • Index Time .75 seconds (45° increments)
  • Dial Plate 31" dia. cast iron surface ground plate
  • Coolant System 35 gallon tank with 10 GPM flow rate
  • Electrical 460 V, 3 phase
  • Optional Coolant Filtration Roll media or magnetic
    filtration
  • unit down to 5 microns

 

H-6000

 

  • Number of Spindles 4,5 and 8 standard
  • Programmable stroke of Head 25"
  • Rapid Traverse of Head 350 IPM
  • Programmable Feed Rates .50-225 IPM
  • Working Thrust of Head Slide 1,000 lbs.
  • Main Spindle Drive 5 H.P. variable frequency drive
  • Secondary Spindle Drive 3 H.P. variable frequency drive
  • Spindle Speed Range 200-1800 RPM
  • Indexing Table 8 station electromechanical drive
  • Index Time .75 seconds (45° increments)
  • Dial Plate 31" dia. cast iron surface ground plate
  • Coolant System 35 gallon tank with 10 GPM flow rate
  • Electrical 460 V, 3 phase
  • Optional Coolant Filtration Roll media or magnetic filtration
  • unit down to 5 microns

 

H-8000

 

  • Number of Spindles 4,5 and 8 standard
  • Programmable stroke of Head 25"
  • Rapid Traverse of Head 350 IPM
  • Programmable Feed Rates .50-225 IPM
  • Working Thrust of Head Slide 1,000 lbs,
  • Main Spindle Drive 5 H.P. variable frequency drive
  • Secondary Spindle Drive 3 H.P. variable frequency drive
  • Spindle Speed Range 200-1800 RPM
  • Indexing Table 8 station electromechanical drive
  • Index Time .75 seconds (45° increments)
  • Dial Plate 31" dia. cast iron surface ground plate
  • Coolant System 35 gallon tank with 10 GPM flow rate
  • Electrical 460 V, 3 phase
  • Optional Coolant Filtration Roll media or magnetic filtration
  • unit down to 5 microns

 

 

 

| Mechanical Engeeniering | Service Department | Hydraulic Capabilieties | Electronic Capabilities | Assembly Department |
Copyright 2008 - 2011 Belden Machine Corporation . All rights reserved